Dissolved Gas Analysis Syringe

Description


Transformer Oil Syringes are used for drawing samples of oil used in transformers and testing for properties such as moisture, dielectric strength, dissolved gases etc. to monitor the quality of the oil & determine the operating conditions as well as the condition of the equipment. Advantages of Glass Syringes v/s other containers Free from Suspended Particles and impurities When oil samples is collected in the syringe, contaminates such as suspended solids or free water if any can be seen in the syringe. These oils can be expelled out immediately and fresh oil sample can be taken so as to take the correct samples back to the lab for accurate test results. This cannot be seen in side another container like vacuum bottles. No direct contact with Air If the sample comes in contact with humid air, the readings of the oil samples will show high atmospheric gases and high moisture hence not providing for an accurate result. The Syringe is air tight and can hold the oil sample in the syringe not allowing it to come in contact with any air. If there is a small leak in the sampling tubing or connections, the vacuum bottles will draw air into the sample, which cannot be seen inside the bottle. If any bubbles are seen in the syringe, they can be expelled out immediately. Protection from direct sunlight The oil collected in the Glass syringes is protected from direct sunlight by packing the syringe filled with the oil in the padded carrying cases.

Product Feature
SALIENTFEATURES OF TRUTH GLASS SYRINGES Syringes are made by an ISO9001 & ISO13485 Certified Company Syringes metal luer lock tips meets the specification of the American National Standards for Medical Materials luer taper fitting performances. ISO 594 (Earlier HIMA MD 70.1 - 1983) Syringes cylinder plunger fit is leak proof and meets the requirement of Federal Specifications GG-S-92 lb / A-A-54840 / ISO 7886 Syringes confirm to ISO594/1;595/2 Syringes are made of borosilicate heat resistant glass processed & annealed under controlled conditions to withstand longer hours of sterilization Syringes are inspected individually for any defects in glass and it’s annealing. They are also tested under polariscope Syringes are thoroughly checked for any leakage or backflow and for smooth plunger movement Syringes offer flexibility of using any standard hypodermic needles Syringes offer clarity, physical strength, chemical inertness and safety that are assured with glass Syringes with luer lock tips are designed to prevent tip portion from accidental chipping or breakage andand to eliminate the possibility of needle disengagement Barrel & plunger are carefully engineered for snug fit & are precisely calibrated for accurate dosage Syringes are passed through the shrinking process to ensure leakproof fit Syringes are Annealed perfectly to eliminate stress and strains. The printing of graduation & logo on the syringe is done by an in house developed ink which is permanently fused into the glass . This account for a lifetime accuracy and legibility Syringes plunger is colored beveled rimed to facilitate dosage measurement Syringes reinforced Flanges which is flat on two sides prevents from rolling Syringes contains no latex and are ideal for latex intolerant patients

Product Specification/Models
Catalog No. Description Graduation 09-04-02-02 1ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 0.02ml 09-05-02-03 2ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 0.05ml 09-08-02-05 5ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 0.2ml 09-09-02-05 10ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 0.2ml 09-10-02-07 20ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 1ml 09-11-02-07 30ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 1ml 09-13-02-08 50ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 2ml 09-15-02-10 100ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 5ml 09-16-02-10 150ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 5ml 09-17-02-10 200ml,TRUTH DGA Glass Syringes, Match Number, Metal Luer Lock Tip, 5ml

Origin
Mumbai

Sewa Medicals Limited.

Address:
Maharashtra
Phone:
91-22-6520-8849
Business Type:
Exporter/
Business Activity:
Manufacturer/
Target Markets:
World Wide
Year established
1/1964
Contact:
Prabhakar Parab

Related Products

General Hypodermic Glass Syringe

General Hypodermic Glass Syringe

With a clear glass barrel, the TRUTH Syringe is used with a

Interchangeable Glass Syringe

Interchangeable Glass Syringe

Interchangeable Syringe 2ml, 5ml, 10ml, 20ml, 30ml, 50ml, 10

Number Glass Syringe

Number Glass Syringe

TRUTH Number Syringes Glass barrels and glass plungers are u

Mini Glass Syringe

Mini Glass Syringe

Syringes are widely used in both clinical and research proce

Tuberculin Glass Syringe

Tuberculin Glass Syringe

Tuberculin syringes have Glass Luer Tips with Blue Glass Rod

LOR Glass Syringeq

LOR Glass Syringeq

Loss of Resistance Syringes are available in Glass Luer Tip,

Insulin Glass Syringe

Insulin Glass Syringe

Insulin Syringes come with special marking of 1ml = 40 units

Dissolved Gas Analysis Syringe

Dissolved Gas Analysis Syringe

Transformer Oil Syringes are used for drawing samples of oil

Toomey / Irrigation Syringe

Toomey / Irrigation Syringe

Toomey Evacuating Syringe is useful in the irrigation of the

Jumbo Glass Syringe

Jumbo Glass Syringe

The expanded product line of TRUTH Large Volume / Jumbo syri

Eccentric Glass Syringe

Eccentric Glass Syringe

Eccentric Tip Syringes (Off-center Tip) are designed for use

Angiography Glass Syringe

Angiography Glass Syringe

Angiography syringes are specially designed syringes with gr