Hydrosys diaphragm compressors are currently operating worldwide in a variety of research, pilot plant, and production applications. They are the preferred compression equipment for applications where the environment, safety, and product purity are of primary concern. Their basic design provides leak tight and non contaminating gas compression.
No Contamination: The metal diaphragm group completely isolates process gas from the hydraulic ic oil and all lubricated parts. Leak Tight Sealing: Self energizing static oring seals in the head assembly prevent process gas leakage. Highly sensitive leak detection rapidly detects a diaphragm or seal failure and contains any effluent within the compressor. High Efficiency: can achieve compression ratios in excess of 20:1 through careful control of the contoured cavities and clearance volumes.
General Specifications (example): Displacements to 0.025 cfm (0.7 lpm); Inlet pressure: 0-2450 psig (0-170barg); Discharge pressures to 6000 psig (41.5 barg); Motor Power: 1.5 HP (1.1 kW); Nominal overall size: 10.5” (267 mm) W x 20” (508 mm) L x 28” (711 mm) H; Approximate Weight: 90 lbs (40 kg);
Ideally suited for use with gases such as Hydrogen, Krypton, Xenon, Argon, Fluorine, Oxygen, NF3, Hel ium, and other high purity or hazardous gases.
• Safe pneumatic operation – no heat, flame or spark risk •
Working Pressure: Up to 20,000 PSI Port Sizes: 3/16”, 1/4”
Ultra High Pressure Check Valves up to 60,000 PSI (414 Mpa)
High Pressure Fittings and Adaptors Hydrosys offers a wide
Hydrosys high pressure hose manufactured in Germany, Ultra-h
Hydrosys could offer 2- and 3-way solenoid valves both for g
Hydrosys diaphragm compressors are currently operating world
Hydrosys high pressure compressors designed and manufactured
hydrosys charging cart for air craft tyre is self contained
hydrosys portable test stands are self contained, ready to o
A TO Z SOLUTION We are an ISO 9001certified organization en
A TO Z SOLUTION Air Filter, Spin On Oil Filter, Fuel Fil